MeteoModels

Model profile

The ARPEGE and AROME weather models, explained

Last updated: 16 November 2026

ARPEGE and AROME are the two forecast models of Météo-France, the French national weather service. ARPEGE is a global model with an unusual trick — it concentrates its resolution over Europe — and AROME is the kilometre-scale model that takes over for the fine detail. Together they are among the most-used models for western Europe.

ARPEGE and AROME at a glance

ARPEGEAROME
Run byMétéo-FranceMétéo-France
CoverageGlobal, stretched gridFrance and neighbouring areas
Resolution~5 km over France, coarser far away~1.3 km
Runs00 / 06 / 12 / 18 UTCEvery 3 hours
Forecast rangeAbout 4 daysAbout 2 days
Best forEuropean weather, days 1–4Storms, wind, fog, terrain, days 1–2

What ARPEGE is

ARPEGE is Météo-France’s global model. The name is a French acronym — Action de Recherche Petite Échelle Grande Échelle, roughly “research project, small scale, large scale” — and it has been in operational use since the 1990s. It was developed jointly with ECMWF, and the two centres still share a large part of their model code: ARPEGE and the European IFS are close relatives.

Where they differ is in purpose. ECMWF’s job is the medium range, out to two weeks, for the whole globe. ARPEGE’s job is the short range, the next few days, with France and Europe as the priority.

The stretched grid

Most global models spread their grid points evenly around the planet. ARPEGE does not. Its grid is mathematically stretched so that the points crowd together over France and thin out towards the opposite side of the globe, near New Zealand.

The result is a grid spacing of about 5 km over France and western Europe — finer than any other global model — and several times coarser in the South Pacific. Météo-France gets regional-model detail where it needs it without the complication of nesting a separate model inside a global one, because the weather systems arriving from the Atlantic are simulated in the same run.

The trade-off is obvious: far from Europe, ARPEGE is a comparatively coarse model. It is still a global forecast, and it is useful everywhere as one more independent opinion, but its best work is done close to home.

Run times and range

ARPEGE runs four times a day, from 00, 06, 12 and 18 UTC, and forecasts about four days ahead. That is a much shorter range than the GFS (16 days), ECMWF (15 days) or even ICON (7.5 days), and it is deliberate: ARPEGE is a short-range model, and Météo-France relies on ECMWF for the days beyond.

In practice this means ARPEGE drops out of a model comparison after day four. It is a strong voice for tomorrow and the day after and silent on next weekend.

What AROME is

AROME is Météo-France’s high-resolution limited-area model. It covers France and its surroundings with a grid spacing of about 1.3 km, starts a new forecast every three hours and runs about two days ahead. Separate AROME configurations cover the French overseas territories, from the Caribbean to the Indian Ocean.

At 1.3 km, AROME is a convection-permitting model: thunderstorms are simulated directly instead of being estimated from larger-scale conditions. It also resolves valleys, coastlines and mountain ranges far better than any global model, which makes it the reference for Mediterranean heavy-rain events, mistral and tramontane winds, Alpine and Pyrenean snow, and fog.

AROME takes its conditions at the edge of its domain from ARPEGE, so the two models are designed to work as a pair: ARPEGE supplies the incoming weather, AROME adds the local detail.

Strengths and weaknesses

Over western Europe in the first two to three days, ARPEGE is one of the best-resolved global forecasts available, and AROME is one of the most detailed regional ones. For French, Iberian, Benelux and western Mediterranean weather, they are essential.

The weaknesses are range and reach. Neither model helps with the medium range, and ARPEGE’s resolution advantage disappears outside Europe. High-resolution models also have a particular way of being wrong: AROME can produce a very convincing thunderstorm in a place where none occurs. The detail is realistic; its exact location is not guaranteed.

How to use ARPEGE alongside other models

For a European forecast in the next four days, ARPEGE and ICON are the two global models with the finest grids over the continent, and both run four times a day. Comparing them with ECMWF gives three largely independent, high-quality opinions.

MeteoModels overlays the global models, so it shows ARPEGE and not AROME. Switch on the certainty mask to see where ARPEGE agrees with the others for your location.

Frequently asked questions

What is the ARPEGE weather model?

ARPEGE is the global weather model of Météo-France. It uses a stretched grid that gives about 5 km resolution over France and western Europe and coarser resolution on the far side of the globe. It runs four times a day and forecasts about four days ahead.

What is the difference between ARPEGE and AROME?

ARPEGE is a global model for the next four days. AROME is a regional model covering France at about 1.3 km for the next two days. AROME resolves thunderstorms and terrain in much more detail and takes its boundary conditions from ARPEGE.

How often do ARPEGE and AROME update?

ARPEGE runs four times a day, at 00, 06, 12 and 18 UTC. AROME starts a new forecast every three hours.

Is ARPEGE better than ECMWF?

Not on global averages or beyond a few days: ECMWF leads there and forecasts much further ahead. Over France and western Europe in the short range, ARPEGE’s finer grid can add useful detail, which is why forecasters look at both.

Does ARPEGE cover the whole world?

Yes. ARPEGE is a global model, but its resolution varies: about 5 km over France and much coarser on the opposite side of the planet.

Keep reading

Overlay ARPEGE on the live map All guides