MeteoModels

Model profile

The ICON weather model, explained

Last updated: 14 November 2026

ICON is the global weather model of Germany’s national weather service, the Deutscher Wetterdienst (DWD). It is one of the handful of models that forecasters check every day alongside the American GFS and the European ECMWF, and it is especially popular in Europe. This guide covers what it is, how it works and when to trust it.

ICON at a glance

ICON
Full nameIcosahedral Nonhydrostatic model
Run byDeutscher Wetterdienst (DWD), Germany
Operational sinceJanuary 2015
Global resolution~13 km
Regional nestsICON-EU ~6.5 km · ICON-D2 ~2.2 km
Global runs00 / 06 / 12 / 18 UTC
Forecast range180 h (7.5 days) at 00 & 12 UTC · 120 h at 06 & 18 UTC
DataFree open data from DWD

What ICON is

ICON stands for Icosahedral Nonhydrostatic. DWD developed it together with the Max Planck Institute for Meteorology, and it became Germany’s operational global model in January 2015, replacing the older GME model. The same code base is used for both day-to-day weather forecasting and climate research, which is unusual: most centres maintain separate models for the two jobs.

Like every numerical weather prediction model, ICON divides the atmosphere into a three-dimensional grid, starts from the best available estimate of the current state of the atmosphere, and steps the equations of motion and thermodynamics forward in time. What sets it apart is the shape of that grid.

The icosahedral grid, and why it matters

Most older global models use a latitude–longitude grid, where the cells shrink towards the poles. That wastes computing power at high latitudes and needs numerical workarounds to stay stable. ICON instead starts from an icosahedron — a 20-sided solid made of triangles — projected onto the globe, and subdivides each triangle again and again until the cells are about 13 km across.

The result is a mesh of triangles of nearly equal size everywhere on Earth, with no special treatment at the poles. It also makes it easy to refine the grid over one region: a finer mesh can be nested inside the global one and the two exchange information as the forecast runs.

“Nonhydrostatic” means the model solves for vertical motion directly instead of assuming the atmosphere is always in vertical balance. That assumption breaks down at fine scales, so dropping it lets the same model run at kilometre-scale resolution, where individual thunderstorms and steep terrain start to matter.

ICON global, ICON-EU and ICON-D2

ICON is really a family of three operational configurations. The global model covers the whole planet at roughly 13 km. Nested inside it, ICON-EU covers Europe at about 6.5 km and forecasts out to five days. ICON-D2 covers Germany and its neighbours, including the Alps, at about 2.2 km and runs every three hours out to 48 hours.

ICON-D2 is a convection-permitting model: its grid is fine enough to simulate thunderstorms explicitly instead of estimating their effect statistically. That makes it one of the most-used short-range models for central Europe. Other countries have adopted the model too — MeteoSwiss runs its own kilometre-scale ICON configurations for the Alps.

DWD also runs ICON as an ensemble: 40 forecasts started from slightly different initial conditions, which shows how sensitive the forecast is to small errors in the starting state.

When ICON updates and how far it forecasts

The global model starts a new run every six hours, at 00, 06, 12 and 18 UTC. The 00 and 12 UTC runs go out to 180 hours (7.5 days). The 06 and 18 UTC runs stop at 120 hours (5 days). Data from each run becomes available a few hours after its start time.

That range is shorter than the GFS, which runs to 16 days, and ECMWF, which runs to 15. If you need a view beyond a week, ICON simply does not have one — you will be comparing fewer models at that range.

What ICON is good at

ICON is a consistently solid performer in the short and early medium range, roughly days one to five, and it is at its best over Europe, where its nests add detail that a 13 km global grid cannot resolve. Forecasters in the Alps and central Europe lean on it heavily for precipitation, wind and fog.

Its four runs a day also make it a fresh second opinion. When a new ECMWF run is still hours away, the latest ICON and GFS runs are often the newest global guidance available.

Where ICON is weaker

Averaged over the globe and over long verification periods, ECMWF’s IFS scores higher than ICON on the standard upper-air measures, particularly beyond day five. ICON’s shorter forecast range also rules it out for long-range pattern watching.

And like every model, it has bad days. A single ICON run that shows a dramatic storm nobody else is forecasting should be treated as one scenario, not as the forecast.

How to use ICON alongside other models

ICON is most useful as part of a comparison. If ICON, GFS and ECMWF all place the same rain band or the same low in the same position, confidence is high. If ICON breaks away from the others, look at the next run before believing it.

On the MeteoModels map you can overlay ICON with the other global models and switch on the certainty mask, which brightens where the models agree and fades where they diverge. That turns “which model is right?” into a question you can answer at a glance for your location.

Frequently asked questions

What does ICON stand for?

ICON stands for Icosahedral Nonhydrostatic. “Icosahedral” describes its grid of triangles derived from a 20-sided solid, and “nonhydrostatic” means it solves for vertical motion directly, which lets it run at very fine resolution.

Who runs the ICON weather model?

ICON is run by the Deutscher Wetterdienst (DWD), Germany’s national weather service. It was developed with the Max Planck Institute for Meteorology and has been operational since January 2015.

How often does ICON update?

The global ICON model runs four times a day, at 00, 06, 12 and 18 UTC. The high-resolution ICON-D2 model for central Europe runs every three hours.

How far ahead does ICON forecast?

The 00 and 12 UTC global runs forecast 180 hours (7.5 days) ahead. The 06 and 18 UTC runs forecast 120 hours (5 days) ahead. ICON-EU runs to five days and ICON-D2 to 48 hours.

Is ICON more accurate than GFS?

It depends on the region, the variable and the lead time. The two are close on global average scores. ICON often has the edge over Europe in the short range thanks to its high-resolution nests, while the GFS forecasts much further ahead.

Keep reading

Overlay ICON on the live map All guides